⚠️ Avertissement important sur les cartes SD par défaut
Les cartes SD originales de la console sont une source principale de problèmes sérieux de performance et de fiabilité. Elles peuvent causer des performances lentes, une perte de données de sauvegarde et une défaillance complète de l'appareil. Nous recommandons fortement de remplacer les cartes SD par défaut par des cartes de marque dès l'achat de la console.
🎬Guide d'installation vidéo
📋Exigences et préparation
🔧 Hardware Required
- ✓OS SD Card: 64GB Kodak SD card recommended (16GB minimum)
- ✓Game SD Card: For ROM storage (128GB+ recommended)
- ✓SD Card Reader: To connect SD cards to your computer
💻 Software Required
- 📦7-Zip: To extract the .gz archive file
- 💾Rufus or Etcher: To flash the .img file to SD card
Identifiez votre version d'écran
This is the most critical step. Installing the wrong firmware can cause your console to not work.
- 1Remove the default SD card from your console's first slot and insert it into your computer.
- 2Go to the screen detection website (link available in the GitHub repository).
- 3Upload the required file from the Boot partition and click "Identify My Screen".
- 4Note your screen type: Original, Panel 3, or Panel 4.
💡 Tip: After identifying your screen, you no longer need the default SD card.
Téléchargez le bon firmware ArkOS
- 1Go to the official ArkOS GitHub releases page.
- 2Download the ArkOS archive file matching your screen version.
- 3Extract the archive using 7-Zip to get the .img firmware file.
Flasher le firmware sur la carte SD
Format your new SD card to exFAT before flashing. Choose either method below:
🔥 Etcher Method
- 1. Open Etcher
- 2. Select the .img firmware file
- 3. Select your new SD card
- 4. Click "Flash" and wait
🔧 Rufus Method
- 1. Open Rufus
- 2. Select your SD card in "Device"
- 3. Choose "Disk or ISO image" and select .img file
- 4. Click "Start" and wait for completion
Configuration de la console et premier démarrage
- 1Insert the new firmware SD card into your R36S's first slot (TF1/OS). Do NOT insert the game SD card yet.
- 2Power on the console. The setup process will start automatically and may take a few minutes. The device may restart several times.
- 3When setup is complete, the ArkOS main screen will appear.
Configurer le type d'appareil et la carte de jeux
⚙️ Set Device Type
- 1. Go to Options menu
- 2. Enter Device Type section
- 3. Select your console model (R35S or R36S)
- 4. Press A to confirm
🎮 Enable Game Card (SD2)
- 1. Insert your game SD card into the second slot (TF2/GAME)
- 2. Go to Advanced menu
- 3. Find "Switch to SD2 for Roms" at the bottom
- 4. Press A to run. Your games will now appear!
✅ Installation terminée !
Votre console R36S fonctionne maintenant avec ArkOS avec une opération stable et des cartes SD fiables. Profitez de vos jeux rétro !
Besoin d'une console R36S ?
Get your R36S retro gaming console from our trusted partners